Alarm Lock Exit Alarm to Monitor Unauthorized Exits with Optional Strobe Light
The PG21 series by Alarm Lock is a rugged, well-made alarm for emergency exit or any area where you want to monitor unauthorized exits. A good example would be an emergency fire escape, back door of a theater or restaurant. It may be an interior door you keep locked or you could have a panic bar on the door so it can stay locked from the outside and open when pushed from the inside. By using the PG21 series of alarms for exit doors, when these doors are opened, a blaring 110dB siren is sounded by the door alarm.
The units come with an optional add-on strobe light and are available in two different finished, Metallic Silver and Metallic Bronze (duronodic). The door alarms may be armed in two different modes:
- Always Armed Mode - key cannot be removed in disarmed mode. To pull out the key, you have to arm the unit
- Standard Arming Mode - key can be removed in armed or disarmed mode
With a narrow-stile sleek design, this is an attractive door alarm complete with a microprocessor that packs the
exit alarm full of features.
Model #'s
PG21MS - standard model with metallic silver finish (no strobe)
PG21MB - standard model with metallic bronze finish (no strobe)
PG21MSS - model with metallic silver finish with strobe
PG21MBS - model with metallic bronze finish with strobe
PG21 Exit Door Alarm Features:
- Surface mount to door or door frame
- Capable of playing one of four distinct sounds enabling you to determine which door is sounding alarm
- Four Alarm Modes for different applications:
- factory default - highest security for fire/emergency exit doors
- entry/exit door with key needed - key used to enter door withing defined time frame or alarm sounds
- delivery mode
- 2-minute delivery door with non-latching alarm
- Programmable time delays
- Battery operated with expected battery life of 2.5 years
- Capable of external power supply
- built-in door bell (require button install)
- Cover tamper protection where unauthorized removal trips alarm
- Key lock tamper where cover cannot be removed without key
- Accepts standard mortise cylinders (not included)
- For exterior key control an optional RIM cylinder may be used (not included)
- Capable of multiple door monitoring with built-in external reed switch contacts
- Form-C relays to connect fire and burglary panel or other devices
- Annunciator beeps when door is opened
- Strobe available with PG21MSS and PG21MBS
- Red LED status indicator light when armed
Product Dimensions:
11''L x 2 1/2''W x 2 3/8''D (9'' L w/o strobe)
Finish
Metallic Silver - PG21MS
Metallic Silver w/ Strobe - PG21MSS
Metallic Bronze - PG21MB
Metallic Bronze w/ Strobe - PG21MBS
Power Requirements
9 Volt Alkaline Battery (supplied)
Also available is the optional PP100 that provides 9-12Vdc at 300mA. Internal battery may be used simultaneously with external battery supply
Sounding
110dB at 10 feet. Piezo electronic sounder sweep siren, steady or pulsing
Relay Contacts
Form-C relays rated at 24VAC/DC at 1A (non-inductive)