Motion Activated Wall Switch

Built in with a timer switch and an override feature, it is completely weatherproof and can be used both indoors as well as outdoors. Watch the lights switch on automatically when someone moves in the detection zone and watch it shut off automatically as the person goes away.

• Install in Minutes
• Remove the faceplate of the existing wall switch
• Remove the existing wall switch
• Connect power leads to the Receiver wires by twisting the wire nut clockwise over the ends.
• Push all wiring into the outlet box.
• Slide the Control Switch on the Receiver Switch to the "ON" position
• Replace existing faceplate.
• Mount Motion Sensor within operating range
• Lights shut off 3 or 10 minutes after motion has stopped
• Override Feature - Control Switch allows you to turn lights on and leave them on.
• Motion Sensor - 140 degree X 60 degree detection zone
• Can be used indoors or outdoors in temperatures of -20F to + 120F
• Timer switch allows choices of on-time: 6 seconds, 3 minutes, 10 minutes
• Activation switch allows day and night operation
• Bonus remote included
• Works with Thomas & Betts, Carlon Products HS2144, HS3620, HS3655
• 2 year warranty

Alerts you when someone enters Detection Zone!