AD-01-S Auto Dialer Control Panel

Wouldn't it be nice to get a call whenever your motion sensor, driveway alarm, or entrance alert is activated?  The AD-01 Auto Dialer make this possible and best of all, is super easy to set up. The auto dialer has 2 trigger inputs on back of the unit.  Connect any product capable of sending a Normally Open trigger can activate the auto dialer.

The applications are limitless:

• When a car enters your driveway, have the driveway alarm dial your mobile phone
• When a supply truck approaches your property, send an alert to operators to make sure they receive the truck
• Have a recording sent to your mobile device when someone enters the stock room at your convenience store

The dialer can support two alarm trigger inputs (normally open) plus a tamper output (normally closed).

Plug the supplied phone cord into the "line" jack on back of the auto-dialer and then into an active phone jack on your home.

• Unit can store one recorded message per trigger, for a total of 2 recorded messages
• The auto dialer can store 9 numbers, each number up to 32 digits
• Dialer can be programmed to dial number as well as play audible alarm when triggered
• Audible alarm may be programmed to sound for up to 99 minutes (default is up to 3 minutes)
• Customizable entry and exit delay times to all you time to enter or exit prior to the alarm arming itself
• Auto dialer dials 9 programmed numbers in sequence, up to three times, until phone is answered.  You can dial * on receiving phone to have it stop dialing
• Product ships with the auto dialer, plug in transformer, telephone cord, and back up battery